1 4

Meenova

Meenova 2m/6ft Lightning to Micro-USB OTG Cable for Selected USB DACs, Blue Yeti X, Cameras and MIDI Devices – Data/Accessory Connection, Not for iPhone Charging

Meenova 2m/6ft Lightning to Micro-USB OTG Cable for Selected USB DACs, Blue Yeti X, Cameras and MIDI Devices – Data/Accessory Connection, Not for iPhone Charging

$18.99 USD
$20.99 USD $18.99 USD
Sale Sold out
Shipping calculated at checkout.
2m Lightning-to-Micro-USB OTG Cable

Connect Selected Micro-USB Audio and Creative Gear to a Lightning Device

A directional OTG cable designed for selected non-MFi USB DACs, microphones, cameras, MIDI devices, and other compatible Micro-USB peripherals. The 2-meter length gives you more room between the iPhone or iPad and your connected equipment.

Lightning Host Connector
Micro-USB Peripheral Connector
2m / 6ft Length
USB 2.0 Data Link
A Specialized OTG Connection

Not a Standard Charging Cable

This cable creates a directional data and accessory connection between a Lightning host device and a compatible Micro-USB peripheral. It is intended for specific USB audio, camera, microphone, and MIDI workflows rather than ordinary phone charging.

USB AUDIO

Connect Selected Non-MFi DACs

Designed for compatible Micro-USB DACs and headphone amplifiers that accept a standard USB OTG data connection from a Lightning host.

MICROPHONE CONNECTION

Listed for Blue Yeti X

The product title lists Blue Yeti X compatibility. Actual operation depends on the microphone’s USB mode, power requirements, connected iOS device, and software.

CAMERA & MIDI

Selected Creative Peripherals

Use with compatible Micro-USB cameras or MIDI keyboards when the peripheral supports the required OTG connection and does not exceed the available host power.

LONGER REACH

2m / 6ft Cable Length

Place a microphone, DAC, camera, or controller farther from the phone or tablet without relying on a short adapter cable.

Directional OTG Connection

Lightning Device as Host, Micro-USB Device as Peripheral

The connectors are not interchangeable. Connect the Lightning end to the compatible iPhone, iPad, or iPod, and connect the Micro-USB end to the selected peripheral.

Lightning
Host: compatible iPhone, iPad, or iPod
Micro-USB
Peripheral: selected DAC, microphone, camera, or MIDI device
Data and Accessory Power

USB 2.0 Data with Limited Host-Side Power

The cable carries USB 2.0 data and may allow a Lightning host to provide limited power to a compatible low-power Micro-USB accessory. It does not provide a charging input for the connected iPhone or iPad.

USB 2.0 Data Actual transfer performance depends on both connected devices and the application.
Accessory Power Some compatible low-power peripherals may draw power from the Lightning host.
No iPhone Charging The cable cannot be used to charge the connected iPhone or iPad.
Compatibility Requires Careful Checking

Connector Fit Does Not Guarantee Protocol Compatibility

The cable is intended for selected Lightning host devices and non-MFi Micro-USB peripherals. The product image lists iOS 9.2 and later, but compatibility can change with device hardware, firmware, iOS version, power demand, and app support.

Explicitly Listed as Incompatible

FiiO Q1 Mark II, FiiO Q5, DJI Mavic Pro, DJI Mavic Mini, DJI Spark, Shure MV51, COZOY Astrapi, Ekahau Sidekick, TempoTec Sonata HD Pro, and other MFi-certified DACs.

Technical Details

Specifications

Product Type Directional Lightning-to-Micro-USB OTG Cable
Host Connector Lightning Male
Peripheral Connector Micro-USB Male
Cable Length 2m / 6ft
Data Standard USB 2.0
Listed iOS Support iOS 9.2 and Later as Shown on the Product Image
Intended Uses Selected USB DACs, Microphones, Cameras, MIDI Devices and Micro-USB Peripherals
iPhone/iPad Charging Not Supported
MFi DAC Support Not Compatible with MFi-Certified DACs
Color Black Cable with Silver Connector Housings
Package 1 × Lightning-to-Micro-USB OTG Cable

Important Compatibility Notes

  • This is a directional OTG cable. The Lightning connector must be attached to the host device.
  • A matching Micro-USB connector does not guarantee that the connected accessory supports the required USB protocol.
  • High-power microphones, DACs, cameras, or controllers may require a separate powered hub or may not work with the available host power.
  • The cable cannot be used to charge an iPhone or iPad.
  • It does not support the MFi-certified DACs or the explicitly incompatible devices listed above.
  • Confirm compatibility with the exact peripheral model before ordering.
View full details